Jiangsu gewabin heat technology Co,.Ltd
E-mail:
gewabin@163.comCall Us:
+86-510-87852861
Jiangsu gewabin heat technology Co,.Ltd
Cooling Towers and Evaporative Condensers can be used in air conditioners, instrumentation, metallurgical intermediate frequency electric furnaces, converters, power plant generator sets, steam turbine nuclear power plants, substations, chemical, pharmaceutical, welding, aluminum, copper foil cooling oil, large hydraulic machinery hydraulic oil Used in industrial manufacturing fields…
Introduction
Cooling Towers and Evaporative Condensers can be used in air conditioners, instrumentation, metallurgical intermediate frequency electric furnaces, converters, power plant generator sets, steam turbine nuclear power plants, substations, chemical, pharmaceutical, welding, aluminum, copper foil cooling oil, large hydraulic machinery hydraulic oil Used in industrial manufacturing fields.
Technical Parameter
| Main Components | |
| Condenser Coil | Made of high-quality seamless steel pipes. The coil unit are made by SS-304/316L stainless steel. Maximum pressure of our coils could reach to 32Mpa. |
| Spray Pump | Sealed by top quality rotary no-limited machinery seal, no leaking, long lifecycle, small horse power, large flow volume, low noise and high performance. |
| Fan | Axial type;aluminum alloy propeller |
| Casing | SS-304/316L or imported Aluminum-zinc alloy plate, Mg-Al-zinc plate |
| Electric Water Treatment Device | Clear the circuit water, effectively avoid the scale forming on the surface of coils and PVC fills. |
| Removable Drift Eliminator | PVC material; Make sure that the water loss rate will be less than 0.002% |
| Cooling Tower Fill | 100% Original Material PVC Infill, special design with great cooling effect |
Working Principle
The water in the basin is pumped to the collector pipe, goes through distribution nozzles and sprays to heat-exchange coil pipes. An even water layer is formed around the outer surface of the pipes, cold air enters to the tower body through the air inlet of the tower lateral and flow through water layer outside the coil pipes in opposite directions from the spray water; a part of the spray water evaporates and absorbs heat from the water in coil. The air absorbs the said heat as well as heat transfer by contact, and becomes saturated hot humid air, then discharges to the atmosphere from the top exhaust fan, the rest spray water flows to the collector pipe at low part of tower and is pumped to spraying cycle.
Selection Guide
1.The cooling water flow G=m3/h
2.The temperature of inlet cooling tower T1=℃
3.The temperature of outlet cooling tower T2=℃
4.The calculation wet bulb temperature of installation location T=℃
The heat rejection calculation of closed cooling tower
Q=1.163xGx(T1-T2)
Application
Hot Tags: cooling towers and evaporative condensers, suppliers, manufacturers, customized, price, Water Cooling Evaporative Fluid Cooler, evaporative condenser chiller, Industrial Cooling Tower factory, cross flow type cooling tower, Anti noise Square Cooling Tower, fluid cooler cooling tower
