Difference Between The Horizontal Cooling Tower And The Inverse Cooling Tower

Product number

Inverse cooling tower

Horizontal cooling tower

Spray cooling tower

Cooling efficiency

Cooling water is slowly decreased by wind resistance and high heat exchange efficiency. Use the condenser for heat exchange, and mostly use copper pipe condenser.

Under the same amount of water, the dual heat dissipation of the filler and condenser is used, 20%-25 higher than the countercurrent tower, and double heat dissipation with filler and stainless steel pipe condenser.

In the mixing room of gas and water, the water in the waters is mixed with heat, and the temperature difference between the water in and out of the water is small. Rely on air to cool out.

The tower body is high, and the return can be ignored.

The fans are exhausted upward, the tower is low, and the backwind is backward. During the wind direction, the wind will talk about the hot air excreted to the air in the air, causing some heat to return.

The tower is low, there is no mechanical ventilation, and the return is large. The flow depends on the flow of high and low pressure to flow, the air flows slowly, and the heat is easy to be around the cooling tower, causing calories to return.

Introduction to the spray cooling tower: On both sides of the tower body, one is the air inlet, the other is the air outlet, and the middle is a hotcame. Set a spray tube road in the imported site. Through atomized spray, spray directly to the hot cabin of the cooling tower, and then the air enters from the air inlet, perform heat exchange, and the high temperature gas that changes heat is discharged from the outlet on the side. The flow of air rely on the circulation of high and low pressure formed by temperature difference. The spray -type cooling tower is composed of wind -absorbing mouth, water vapor mixed chamber, water shielding board, exhaust port, and water set.

www.gwbrefrigeration.com