Structure Of A Closed Cooling Tower Circulating Water Pump

1. Pump body: the main body of the pump, play a fixed support, the internal flow channel is smooth and more efficient and energy -saving, the material has strong anti -vapor erosion capacity, and the service life is longer.
2. Imdium: The core component of the pump, through its high -speed rotation to make the water centrifugal movement, enters the pipeline, and it is better to have high speed and strong resistance.
3. Mechanical seal: The function of mechanical sealing is mainly to prevent the water inside the pump body from leaking out, prevent the outside air from entering the pump, and keep the pump body always vacuum. Pay attention to prevent the sealing failure caused by the rust of the bearing in the daily use. question.
4. Motor: The motor drives drive the high -speed rotation of the pump shaft and the impeller high -speed rotation of the motor. The lower the large traffic, the lower the fourth or sixth motor.

5 Pump axis: The main function of the pump axis is to transmit power. Supporting the impeller runs at a high speed at a normal amount. It is connected to the other end of the motor axis to support the impeller to rotate. The material of the pump shaft is mainly based on whether the transmitted medium is corrosive. Sex as a standard.

The centrifugal pump uses the rotation of the leaf wheel to work to work to work. Before starting the pump, the pump shell and water absorption pipe must be filled with water, and then the motor must be activated, so that the pump shaft will drive the impeller and water to do high -speed rotation exercises. Water flowing into the water pipeline of the water pump.

www.gwbrefrigeration.com