Products

Contact Us

  • JIANGSU GEWABIN HEAT TECHNOLOGY CO.,LTD
  • Add: Industrial Concentration Zone (North) Of Wanshi Town, Yixing District, Wuxi, Jiangsu Province, China
  • Tel: +86-510-87852861
  • Fax: +86-510-87853861-801
  • Mob: +8613867612832
  • WhatsApp: +8613867612832
  • E-mail: Gewabin@163.com
Closed Circuit Cooling Towers

Closed Circuit Cooling Towers

  • Closed circuit Cooling Tower also named Evaporative cooler. It is the type of cooling tower placed the heat exchange tube inner the tower to ensure the cooling effect by circulation of air, spray water and circulating water.

Cell phone:+86-13867612832‬
E-mail:gewabin@163.com

    Introduction

    Closed circuit Cooling Tower also named Evaporative cooler. It is the type of cooling tower placed the heat exchange tube inner the tower to ensure the cooling effect by circulation of air, spray water and circulating water.

    Closed Circuit Cooling Towers插图

     

    Main Components
    Coil Made of high-quality seamless steel pipes. The coil unit are  made by SS-304/316L stainless steel. Maximum pressure of our coils could reach to 32Mpa.
    Spray Pump Sealed by top quality rotary no-limited machinery seal, no leaking, long lifecycle, small horse power, large flow volume, low noise and high performance.
    Fan Axial type;aluminum alloy propeller
    Casing SS-304/316L or imported Aluminum-zinc alloy plate, Mg-Al-zinc plate
    Electric Water Treatment Device Clear the circuit water, effectively avoid the scale forming on the surface of coils and PVC fills.
    Removable Drift Eliminator PVC material; Make sure that the water loss rate will be less than 0.002%
    Cooling Tower Fill 100% Original Material PVC Infill, special design with great cooling effect

     

    Closed Water Cooling Tower Advantage

    1. Combination Closer approach to wet bulb temperature and reduce fouling improve process efficiency

    2. Lower process temperatures ,less required space ,and lower energy consumption.

    3. Through Systems Reduces environmental impact ,saving up to 95% of the cooling water .

    4. Reduced installed Cost And Space Requirements Effectively combines the function of a cooling tower and heat exchanger into one piece of equipment ,reduce required piping and system complexity.

     

    VS open cooling tower

    Closed circuit cooling tower

    1. The whole pipeline system is closed circulation, and the circulating water is distilled water, which can make the vacuum furnace heat exchanger and small pipelines not scale, pollute, or corrode, and almost make the vacuum furnace Double the life.

    2. There is almost no water consumption in circulating water. The same type of equipment saves about 7,000 tons of water per year.

    3. Low operating costs and low maintenance

     

    Open cooling towers

    1. It is necessary to excavate 1-2 20 cubic meters of groundwater pool. Due to the water drop and open head loss

    2.the power consumption is more than that of closed towers. Two sets of pumps are needed, which consumes a lot of electricity.

     

    Facilities and equipment

    Closed Circuit Cooling Towers插图1

     

    Hot Tags: closed circuit cooling towers, suppliers, manufacturers, customized, price, Cross Flow Cooling Tower manufacturers, Hybrid Closed Circuit Cooling Tower, Cooling Tower Systems factory, Closed Circuit Cooling Towers, Anti noise Square Cooling Tower, flow tech cooling tower

     

Get In Touch

Send Your Message